Handpulverbeschichtung Spritzpistole einheit

Handpulverbeschichtung Spritzpistole einheit

1,Static electricity manual powder coating spray gun Unit
2,PGC1 Control Unit with PG1 powder coating gun
3,provide excellent

manual powder coating spray gun  ,electrostatic powder coating machine,used for manual powder coating,for spraying metallic products.

Advantage 

0-100 Digital Adjustable KV 
Fully Adjustable Amperage 
PGC1 Control Unit with PG1 powder coating gun
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air. 
Comes with Full Array of Nozzle Assortment. 
Field Tested and Proven to operate in the toughest environments. 
Comes with different array of delivery systems:
Hope Feed - 45L

this system is specially balanced for the maximum spray capability with 
the Smoothest Finish Possible.

Manual coating equipment Function description

the powder gun through the powder hose . The powder is electrostatically

charged at the nozzle of the gun. In addition, an electrostatic field is

created between the gun nozzle and the grounded object. The charged

powder spray remains adhered to the surface of the object.

The powder is fluidized by air forced through a porous plastic plate from

below. The powder acquires, thereby, fluid-like characteristics.

The conveying air, supplementary air, and rinsing air are set on the control

Unit

Technical Data

Power range                                   220v/110v

Frequency                                     50/60HZ

Temperature range in use                      -10 °C+50 °C

Powder Gun

Gun weight:    ………………                    500G

Rated output voltage ………                      24VDC

Input voltage     ……………                       - 200kv

Maximum output current  ………                   180Ua(max)

Maximum output voltage…………                   0-100KV (  adjustable)   

Maximum powder injection :………                    600g/min

Polarity ………………                                negative (-)  

Pneumatic technical spec

Maximum input-air pressure …………..                 8kg/cm

Optimum input-air pressure……..                        6kg/cm

Minimum input-air pressure   ……                      4kg/cm

Maximum water vapor content or compressed air …..      1.4g/N m3 

Maximum oil vapor content of compressed air   ……..     0.1ppm

Maximum cimpressed-air consumption………            13.2 m3/h

Include

A control unit power supply cable

- A air filter

- A air pressure regulator

- A fluidized powder hopper

- A plug-in injector

- An manual powder gun with gun cable, powder

hose, rinsing air hose and standard nozzle set.

- Pneumatic hoses for conveying air (red), supplementary

air (black) and fluidizing air (black)

powder hose

Ground wire

Electrostatic powder coating manufacture in China,Electrostatic Powder Coating Machine,Powder spraying gun, powder spray gun, metallic powder coating system, electrostatic powder spraying unit, electrostatic powder spraying.electrostatic spray application system,Surface Finishing Equipment.