- Powder Coating Gun
- Powder Coating Booth
- Powder Coating Oven
- automatic powder coating gun and equipment
- Reciprocator for pwoder coating gun
- powder coating line
- Powder feed center
- Powder Hopper
- Tribo powder spray gun
- Electrostatic Liquid Spray Guns
- Sandblasting Machine
- Parker Ionics Replacement Part
- powder coating testing meter
- Powder Coating Line Spare Part
- Powder Coatings
- NEW products
- Powder Coating Gun Machine on Sale
- KCI powder coating gun spare part
- PG1 / PG2A / GM02 / GA02 / GM03 / GA03 Powder coating gun spare part
- PEM C4 / X1 Powder Spray gun parts
- Encore / Prodigy / Vantage / Sure Coat / Versa-Spray / 100 Plus Feed Pumps spray gun parts
- Sames / Eurotec Powder coating gun parts
- COLO powder coating gun parts
- bo'x feed
powder painting machine
powder painting machine, powder painting machines, powder painting equipment, electrostatic powder painting machine
Model: Colo-800-2
configuration:
control unit X 1 pc
powder spray gun X 1 pc
powder container X 1 pc
Trolley X 1 pc
powder pump X 1 pc
oil-water separator X 1 pc
air pressure regulating valve X 1 pc
Colo-800 powder coating machine is with one-touch intelligent operation button, working well in flat workpieces, complicated workpieces and recoating workpieces
Fully Adjustable Amperage
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 45L (samll hopper also could availbale)
Electronics it is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
When two operators are required,COLO-800 and COLO-800D can be configured as a Dual Gun unit. Both operators each have a powder coating gun, control unit and powder injector that use powder from the same powder hopper.
Technical Data:
Control air unit
Input voltage: 220V/110V | Frequency: 50HZ/60HZ | Input power:50W |
Output voltage:Max 20V(peak to peak) | Output current: 0.7 A | Control voltage: 24V/DC |
Work temperature range: -5°C-40°C | Safety: IP54 | |
Compressed air moisture content: 1.3g/m3 max | Input air pressure:4-8kg/m3 | |
Input barometric pressure: 6-8 bar | The largest air consumption:24m3/h |
Powder spray gun
High Pressure Mode: Inside | Max Power Injection: 650g/min | Max Output Current:150uA |
Polarity: Negative | Output voltage: 0-100KV max | Gun weight: 550g |
Output voltage:Max 20V(peak to peak) | Connection cable: 5M |
- Tel
- *Title
- *Content
- Tel
- *Title
- *Content