eletrostatic paint

electrostatic painting equipment

Typical characteristics

manual box unit is good for quick and easy color changes,It is designed to use the powder manufacturer’s original carton. An inclined vibration table allows complete emptying of the powder box via the fluidized suction tube.

0-100 Digital Adjustable KV
Fully Adjustable Amperage

Interchangeable with the  original equipment
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
 
Because this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.

Configuration:

2pcs optistar control unit power supply cable

- 2pcs air filter

- A air pressure regulator

- 2pcs suction tube

- 2pcs plug-in injector

- 2pcs optiselect manual powder gun with gun cable, powder

hose, rinsing air hose and standard nozzle set.

- Pneumatic hoses for conveying air (red), supplementary

air (black) and fluidizing air (black)

powder hose

Ground wire

Structure:

1 control unit

2 manual powder gun

3 injector

4 Frame with hand rail

5 Fluidizing/suction unit

6 Vibrating base

7 Swivel wheel

8 Swivel arm with guide sleeve

9 Filter unit

10 Hose holder

11 Gun holder

12 Rubber wheel

Technical data:

Electrical data

Mains input voltage: 220V/110V

Operating frequency: 50Hz /60Hz

Powder: 50W

Output voltage (to the gun): 0-100KV ( adjustable)

Maximum output current (to the gun): 180UA(max)

Protection type: IP54

Approvals: CE Certification

Pneumatical data

Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)

Recommended input pressure: 7 bar(101.5PSI)

Max. Water vapor content of the compressed

Air 1.3 G/m 3;

Max. Oil vapor content of the compressed air 0.1 mg/m3;

Dimensions

Carton size: 120x79x73cm G. W: 55kg.

Connection

The process of the coating is like this :the powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns . The guns spray a powder/air mixture onto the workpieces.

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermosetpolymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.

The powder coating process involves three basic steps:

1. Part preparation or the pre-treatment
2. The powder application
3. Curing

COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including automated equipment, spray booths and spare parts famous brand in china.

powder coating gun, powder coating machine, powder coating system,powder coating equipment,powder coating control unit