Powder injector 1007 780 with coded quick release connections

Powder injector 1007 780 with coded quick release connections

The injector is used to convey normal organic powders between the powder hopper and the powder gun. The injector is

supplied with a PTFE insert sleeve as standard. The plug-in injector allows fast cleaning and easy handling because it can be

detached from the powder hopper without using any tools. All connections are plug-in and not interchangeable (when using in

manual equipment). The injector can be disassembled without special tools.

Structure of the powder injector 

Principle of the injector

If air flows through the nozzle into the cavity, a vacuum is created in the cavity (see figure below). This vacuum causes powder to

be drawn up the suction tube and into the cavity. A powder/air mixture is created. The forward air velocity at the nozzle conveys

the powder/air mixture through to the powder hose to the gun.

Application of powder injector