Durable Powder injector 1007 780 for GM03 manual gun

Powder injector 1007 780 with coded quick release connections

The injector is used to convey normal organic powders between the powder hopper and the powder gun. The injector is

supplied with a PTFE insert sleeve as standard. The plug-in injector allows fast cleaning and easy handling because it can be

detached from the powder hopper without using any tools. All connections are plug-in and not interchangeable (when using in

manual equipment). The injector can be disassembled without special tools.

Structure of the powder injector

IG06 Powder injector - complete (pos. 1-13) 1007 780

A Conveying air check valve unit (red marking) - complete (incl. pos. 6, 8, 9 and 12) 1005 589

B Supplementary air check valve unit (black marking) - complete (incl. pos. 7, 8, 9 and
13)1005 590

C Injector body - complete (incl. pos. 1, 2, 10 and 11) 1006 530

1 Injector body (without pos. 2) 1006 484

2 O-ring - Ø 16x2 mm 1007 794#

3 Insert sleeve - PTFE, complete 1006 485#

4 Hose connection - Ø 10-12 mm, complete (incl. pos 4.1) 1006 531

4.1 O-ring - Ø 16x1.5 mm 205 141#

5 Threaded sleeve 1006 483

6 Connector (conveying air) - NW 5.5 1004 366

7 Connector (supplementary air) - NW 5.5 1004 367

8 O-ring - Ø 11x1.5 mm 1000 532#

9 Filter element - Ø 9/4x27 mm 1003 698#

10 Nozzle 1006 488

11 Nozzle fixation - complete (incl. pos. 11.1) 1007 792

11.1 O-ring - Ø 8x1 mm 1007 793#

12 Body (red) 1004 369

13 Body (black) 1004 370

16 Conveying air hose - Ø 8/6 mm (red) 103 500*

17 Supplementary air hose - Ø 8/6 mm (black) 103 756*

18 Quick release coupling for conveying air hose - NW5-Ø 8 mm 261 645

19 Quick release coupling for supplementary air hose - NW5-Ø 8 mm 261 637

Powder hose - 66 type, POE, Ø 16/11 mm, with conductive strip (standard) 105 139*#

Powder hose - 74 type, POE, Ø 15/10 mm, with conductive strip 1001 673*#

Powder hose - 75 type, POE, Ø 18/12 mm, with conductive strip 1001 674*#

Principle of the injector

If air flows through the nozzle into the cavity, a vacuum is created in the cavity (see figure below). This vacuum causes powder to

be drawn up the suction tube and into the cavity. A powder/air mixture is created. The forward air velocity at the nozzle conveys

the powder/air mixture through to the powder hose to the gun.

Application of powder injector