Polyester expoy plastic powder coating

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

STORAGE AND TRANSPORT

Storedin less than 30 °C, ventilated, dry, clean room, not near the firesource, heating, avoid direct sunlight, the product in the transportshould be to prevent rain, sun, prolonged sun exposure. Storage productsin line with the above conditions, since the date of production,effective storage period is 6 months. Over the storage period may bere-tested and the results were consistent with, can still be used.

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermosetpolymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.